path: root/shoshin-config.org

#+STARTUP: overview
#+PROPERTY: header-args:emacs-lisp :lexical t

* ANUSTART

To welcome in Emacs 28 I intend to re-aquaint myself with the application
and its ecosystem. I've been perusing the packages available through the
default ELPA and non-gnu ELPA repos and trying to put together the various
things that I've grown accustomed to.

However, with a beginner's mind, I've been trying to avoid going down the
same old idiosyncratic paths. Courting a bit of discomfort in order to learn
what newcomers might experience coming to Emacs in this current version.

** Overview

This document is a journal, manual, and a program at once. I'm no expert at
writing a document like this. If you happen to be reading it, the journal
nature may be confusing. Over time, the journal will be incorporated into the
bits that are a manual, solidified knowledge gained through the experience.

The program bits will be tangled into [[file:shoshin-config.el]]. As a program, it
requires a certain structure from top to bottom. Here, the snippets may be
scattered around. I'll attempt to have a system to keep them organized, but
this is all an experiment.

The following code block is the "table of contents" that determines what
is tangled into the resulting elisp file:

#+begin_src emacs-lisp :tangle yes :noweb yes
  ;;; shoshimacs.el --- Beginner's Mind Config  -*- lexical-binding:t -*-

  ;;; Package Management
  <<package-management>>

  ;;; Major Keybinding
  <<keybinding>>

  ;;; Completion
  <<completion>>

  ;;; Editing
  <<editing>>

  ;;; Programming
  <<programming>>

  ;;; Projects
  <<projects>>

  ;;; External Services
  <<external-services>>

  ;;; User Interface
  <<user-interface>>
#+end_src

* Package Management
:PROPERTIES:
:header-args:emacs-lisp+: :noweb-ref package-management :noweb-sep "\n\n" :results silent
:END:

I've been using [[https://github.com/radian-software/straight.el#start-of-content][straight.el]]
as my package manager since 2019 when I moved away from Spacemacs as my
main configuration for day-to-day work. While I definitely recommend it
as a flexible yet minimal package manager, it is certainly more useful
to experienced Emacs users.

This configuration will stick to packages available through the built-in
~package.el~ system. As of Emacs 28, this is everything in the ELPA and
non-gnu ELPA package repositories. 

** ELPA and Non-GNU ELPA

ELPA packages have their copyright assigned to the FSF, which is a requirement
for any code to be included into Emacs itself. ELPA packages are thus the
most likely to be merged into Emacs as a new feature. Some, like EMMS, are
likely to continue as "add-on" optional features only some users may choose.

Non-gnu ELPA is relatively new, and does not require copyright assignment
to the FSF. Packages are added to both repositories through the emacs-devel
mailing list and the maintainers there. It intends to extend the packages
available to the base Emacs installation while providing a bridge to inclusion
in ELPA or Emacs proper at some time in the future.

*** Add non-gnu ELPA to Emacs < 28

Emacs 28 is the first version to include non-gnu ELPA by default. Some
distributions may not yet have it as an available package.

#+name: add-nongnu-elpa
#+begin_src emacs-lisp
  (when (< emacs-major-version 28)
    (package-initialize)
    (add-to-list 'package-archives '("nongnu" . "https://elpa.nongnu.org/nongnu/"))
    (package-refresh-contents))
#+end_src

** Installing Packages

~package.el~ provides the [[help:package-install][package-install]] command which can be used interactively
or from Lisp code like this configuration. If a package is already installed,
it won't try to install it again. When you install a package this way, Emacs will
add its name to [[help:package-selected-packages][package-selected-packages]].

You can also use ~list-packages~ to browse, install and upgrade packages as
well.

** Packages not in the default repos

Any elisp package that is in Emacs's [[help:load-path][load-path]] can be ~require~'d and used.

*** COMMENT xah-fly-keys

muscle memory has bound me to xah-fly-keys, and so i've decided to just
manually install it by cloning the repo and adding it to the

#+begin_src shell :var dir=(expand-file-name "xah-fly-keys" user-emacs-directory) :tangle no
  git clone https://github.com/xahlee/xah-fly-keys $dir
#+end_src

#+begin_src emacs-lisp
  (add-to-list 'load-path (expand-file-name "xah-fly-keys/" user-emacs-directory))
  (require 'xah-fly-keys)
  (xah-fly-keys-set-layout "qwerty")
  (xah-fly-keys t)
#+end_src

however, it is now in non-gnu elpa! so i don't need this anymore.

** Emacs 28 native compilation

[[info:elisp#Native Compilation][elisp#Native Compilation]]

#+begin_src emacs-lisp
  (when (and (functionp #'native-comp-available-p) (native-comp-available-p))
    (setq native-comp-always-compile t
	  package-native-compile t))
#+end_src

* Keybinding

keybindings are the key to playing Emacs like an instrument. no matter
what you choose, keep in mind that you can always bind keys to your
most commonly used commands to make things convienient.

i highly recommend creating a personal key map bound to a "leader key".
you initiate it with the leader, and then bind following key sequences
to commands you use. creating your own will make it easier to remember
and keep organized.

** xah-fly-keys

this is what i adopted to combat rsi. my muscle memory is tied into it
tightly right now. you may have other opinions about keybindings

#+name: keybinding
#+begin_src emacs-lisp
  (package-install 'xah-fly-keys)
  (require 'xah-fly-keys)
  (xah-fly-keys-set-layout "qwerty")
  (setq xah-fly-use-control-key nil
	xah-fly-use-meta-key nil)
  (xah-fly-keys t)
#+end_src

i'm setting it up early in the config so that its keymaps are available
to modify / integrate with other packages.

* Completion
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref completion :noweb-sep "\n\n" :results silent
:END:

Completion is a huge part of my experience using Emacs. I have been on
an evolving journey of from the basic type of terminal tab completion 
to spaceship level UI implemented as almost a sub-application in Emacs.

This configuration is aiming at using a new crop of completion enhancements
that tie into Emacs's native completion API. This is a more modular approach
that allows a sort of composition of extensions to completion behavior and
its appearance in the user interface.

** Emacs completion styles

[[info:emacs#Completion Styles][emacs#Completion Styles]]

#+begin_src emacs-lisp
  (setq completion-styles '(flex basic partial-completion emacs22)
	completion-cycle-threshold 3
	tab-always-indent 'complete)
#+end_src

** [[info:consult#Top][consult]] - Consulting [[info:elisp#Minibuffer Completion][completing-read]]

consult offers enhanced completion similar to ivy and helm, but with the
built in completing read functionality of the minibuffer.

#+begin_src emacs-lisp
  (package-install 'consult)
#+end_src

main entry point would be ~consult-buffer~. however, there are many consult
commands that can enhance any completing read function.

*** consult keybindings

#+begin_src emacs-lisp
  (global-set-key (kbd "C-x b") #'consult-buffer)
  (define-key xah-fly-leader-key-map (kbd "f") #'consult-buffer)
  (define-key xah-fly-command-map (kbd "n") #'consult-line)
#+end_src

*** note about ~consult-themes~

i had a bit of a mess with it at first, because i'd implemented my own
solution to a quirk of theme loading. enabling themes is additive,
and can cause unexpected results. so i added [[info:elisp#Advising Functions][advice]]
to ~load-theme~ to automatically disable the old one before enabling
the new. it seems like consult does this as well as switching themes
/as you narrow your selection/.


** corfu

#+begin_src emacs-lisp
  (package-install 'corfu)
  (setq corfu-auto t
	corfu-cycle t
	corfu-quit-no-match t)
  (global-corfu-mode t)
#+end_src

*** corfu-terminal enables in terminal interface

#+begin_src emacs-lisp
  (package-install 'corfu-terminal)
  (unless (display-graphic-p)
      (corfu-terminal-mode +1))
#+end_src

** embark

#+begin_src emacs-lisp
  (package-install 'embark)
#+end_src

** marginalia

#+begin_src emacs-lisp
  (package-install 'marginalia)
  (marginalia-mode)
#+end_src

** vertico

#+begin_src emacs-lisp
  (package-install 'vertico)
  (setq minibuffer-prompt-properties
	'(read-only t cursor-intangible t face minibuffer-prompt))
  (add-hook 'minibuffer-setup-hook #'cursor-intangible-mode)
  (setq read-extended-command-predicate
	#'command-completion-default-include-p)
  (setq enable-recursive-minibuffers t)
  (vertico-mode)
#+end_src

** which-key

#+begin_src emacs-lisp
  (package-install 'which-key)
  (which-key-mode)
#+end_src

* Editing
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref editing :noweb-sep "\n\n" :results silent
:END:
** [[info:emacs#Matching][electric pair mode]]
I've been using smartparens -> (bookmark-jump "smartparens package") in my
main config. electric pair mode does some of what smartparens does out of
the box. what i'm missing is the generalized ~sp-hybrid-slurp~ or
whatever it was called. but using the built in is good for now. further
config might get what i want with vanilla built ins.

#+begin_src emacs-lisp
  (electric-pair-mode)
#+end_src

** markdown mode
#+begin_src emacs-lisp
  (package-install 'markdown-mode)
#+end_src

* Programming
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref programming :noweb-sep "\n\n" :results silent
:END:
** Languages
*** Javascript

#+begin_src emacs-lisp
  (package-install 'json-mode)
#+end_src

*** Ruby

** Dev Docs
#+begin_src emacs-lisp
  (package-install 'devdocs)
#+end_src
* Projects
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref projects :noweb-sep "\n\n" :results silent
:END:

** project.el
* External Services
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref external-services :noweb-sep "\n\n" :results silent
:END:

Packages that enable communication via HTTP or connect with external APIs or other
resources outside of Emacs and/or the local machine.

** plz - http library

this is an http library that intends to solve some of the "pain points" of url.el.
i ran into some of them trying to download and install the Victor Mono font used
by my configuration. the downside of ~plz~ is that it is dependent on ~curl~, rather
than being pure elisp. however, this is a non-issue for me, especially since my
use case had devolved into using ~make-process~ to call ~wget~ and then implement
a "callback" with a process sentinel. kinda neat, but maybe too much.

#+begin_src emacs-lisp
  (package-install 'plz)
#+end_src

the sourcehut package in this config also depends on ~plz~

** sourcehut
there's a new package in GNU ELPA for some basic interaction with the sr.ht http api.
i'm interested to try it out since i still pay for the account, plus the forge is
free software and could be self-hosted if it comes to it.

it also depends on ~plz~ which is another new package providing a nicer API for
HTTP requests I was going 

#+begin_src emacs-lisp
  (package-install 'srht)
  (setq srht-username "shoshin")
#+end_src

an API token is stored in my ~.authinfo~ file.

* UI
:PROPERTIES:
:header-args:emacs-lisp: :noweb-ref user-interface :noweb-sep "\n\n" :results silent
:END:
** basic Emacs UI tweaks

#+begin_src emacs-lisp
  (when (display-graphic-p)
    (scroll-bar-mode -1)
    (fringe-mode '(8 . 0)))

  (tab-bar-mode t)
  (display-battery-mode t)
#+end_src

** [[file:elpa/darkroom-0.3/darkroom.el::;;; Commentary:][darkroom]] - distraction free writing

the notes suggest using ~darkroom-tentative-mode~ which auto switches
depending on the window layout currently in use.

#+begin_src emacs-lisp
  (package-install 'darkroom)
#+end_src

*** comp warnings
#+begin_example
Warning (comp): darkroom.el:337:13: Warning: Use keywords rather than deprecated positional arguments to `define-minor-mode' Disable showing Disable logging
Warning (comp): darkroom.el:338:9: Warning: reference to free variable ‘darkroom-tentative-mode’ Disable showing Disable logging
Warning (comp): darkroom.el:361:13: Warning: Use keywords rather than deprecated positional arguments to `define-minor-mode' Disable showing Disable logging
Warning (comp): darkroom.el:365:10: Warning: function ‘darkroom-tentative-mode’ defined multiple times in this file Disable showing Disable logging
#+end_example

** Fonts 
For code, I've grown fond of Victor Mono.

#+begin_src emacs-lisp
  (set-frame-font "Victor Mono")
#+end_src

*** COMMENT Attempt to install the font via Emacs, url.el and ~make-process~

in the end, this "works" but isn't very useful. the font cache needs to be updated
before Emacs runs for the font to register anyway. This will instead be implemented
as a shell script that can be run as a pre-req before initializing emacs.

however, i did learn a bit about [[info:elisp#Sentinels][Sentinels]] they are kinda neat.

#+begin_src emacs-lisp
  ;; this actually doesn't work right, because the process unzipping starts
  ;; before the file is completely written i think.
  (url-retrieve "https://rubjo.github.io/victor-mono/VictorMonoAll.zip"
		#'victor-mono-download-callback)

  (make-process :name "getting victor mono"
		:buffer "*Download Victor Mono*"
		:command '("wget" "--output-document=/home/shoshin/.fonts/VictorMonoAll.zip"
			   "https://rubjo.github.io/victor-mono/VictorMonoAll.zip")
		:sentinel #'victor-mono-download-callback)

  (defun victor-mono-download-callback (process event)
    (if (string-equal "finished\n" event)
	(let ((default-directory  "~/.fonts/VictorMono"))
	  (unless (file-directory-p default-directory)
	    (make-directory default-directory))
	  (make-process :name "unzipping victor mono"
			:buffer "*Unzip Victor Mono*"
			:command `("unzip" ,(expand-file-name "~/.fonts/VictorMonoAll.zip"))
			:sentinel #'victor-mono-sentinel))))

  (defun victor-mono-sentinel (process event)
    (print event)
    (if (string-equal "finished\n" event)
	(progn (message "works!")
	       (make-process :name "run fc-cache" :command '("fc-cache")))))
#+end_src

** Highlights
*** [[help:global-hl-line-mode][global-hl-mode]]
i enjoy having the current line highighted as a visual cue. 

#+begin_src emacs-lisp
  (global-hl-line-mode t)
#+end_src

can be toggled with <leader> l 2 

*** COMMENT lin-global-mode 
Make `hl-line-mode' more suitable for selection UIs

add other hooks to ~lin-mode-hooks~

#+begin_src emacs-lisp
  (setq my-lin-mode-hooks
	'())
#+end_src

#+begin_src emacs-lisp
  (package-install 'lin)
  (require 'lin)
  (setq lin-face 'lin-blue)
  (mapc (lambda (e) (cl-pushnew e lin-mode-hooks)) my-lin-mode-hooks)
  (lin-global-mode)
#+end_src
** Themes

#+begin_src emacs-lisp
  (setq my-chosen-themes
	'(cyberpunk-theme dracula-theme))
  (mapc #'package-install my-chosen-themes)
#+end_src

** windresize

#+begin_src emacs-lisp
  (package-install 'windresize)
#+end_src